C9115AXI-EWC-X Specifications
|
| Description |
Cisco Catalyst 9115AX Series |
| Software |
Cisco Unified Wireless Network Software Release 8.9 or later
Cisco IOS ® XE Software Release 16.11or later
|
| Supported wireless LAN controllers |
Cisco Catalyst 9800 Series Wireless Controllers
Cisco 3500, 5520, and 8540 Series Wireless Controllers and
Cisco Virtual Wireless Controller
|
|
802.11n version 2.0 (and related)
capabilities
|
4x4 MIMO with four spatial streams
Maximal Ratio Combining (MRC)802.11n and 802.11a/g
beamforming20- and 40-MHz channels
PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
Packet aggregation: A-MPDU (transmit and receive),
A-MSDU (transmit and receive)
802.11 Dynamic Frequency Selection (DFS)
Cyclic Shift Diversity (CSD) support
|
| 802.11ac |
4x4 downlink MU-MIMO with four spatial streams
MRC802.11ac
beamforming20-, 40-, 80-, and 160-MHz channels
PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz)
Packet aggregation: A-MPDU (transmit and receive),
A-MSDU (transmit and receive)
802.11 DFSCSD support
|
| 802.11ax |
4x4 downlink MU-MIMO with four spatial streams
Uplink/downlink OFDMA
TWT
BSS coloring
MRC802.11ax beamforming
20-, 40-, 80-, and 160-MHz channels
PHY data rates up to 5.38 Gbps
(160 MHz with 5 GHz and 20 MHz with 2.4 GHz)
Packet aggregation:
A-MPDU (transmit and receive),
A-MSDU (transmit and receive)
802.11 DFS
CSD support
|
| Integrated antenna |
2.4 GHz
peak gain 3 dBi, internal antenna, omnidirectional in azimuth
5 GHz
peak gain 6 dBi, internal antenna, omnidirectional in azimuth
|
| External antenna (sold separately) |
Cisco Catalyst 9115AXE Access Points are certified for use with antenna gains
up to 6 dBi (2.4 GHz and 5 GHz)Cisco offers the industry's broadest selection of antennas,
delivering optimal coverage for a variety of deployment scenarios
|
| Interfaces |
1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz
Management console port (RJ-45)USB 2.0 (enabled via future software)
|
| Indicators |
Status LED indicates boot loader status, association status, operating status,
boot loader warnings, and boot loader errors
|
| Dimensions (W x L x H) |
Access point (without mounting brackets):
C9115I: 8.0 x 8.0 x 1.5 in. (20.3 x 20.3 x 3.8 cm),
C9115E: 8.0 x 8.0 x 1.7 in. (20.3 x 20.3 x 4.3 cm)
|
| Input power requirements |
802.3at Power over Ethernet Plus (PoE+),
802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ®)
Cisco power injector, AIR-PWRINJ6=802.3af PoE
Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)
Note: When 802.3af PoE is the source of power,
both 2.4-GHz and 5-GHz radios will be reduced to 2x2 and Ethernet downgraded to 1 Gigabit Ethernet.
In addition, the USB port will be off.
|
| Environmental |
Cisco Catalyst 9115AXI
Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
Operating temperature: 32° to 122°F (0° to 50°C)
Operating humidity: 10% to 90% (noncondensing)
Operating altitude test: 40˚C, 9843 ft.
Note:
When the ambient operating temperature exceeds 40°C,
the access point will shift from 4x4 to 2x2 on both the 2.4-GHz and 5-GHz radios,
uplink Ethernet will downgrade to 1 Gigabit Ethernet, and the USB interface will be disabled.
Cisco Catalyst 9115AXE
Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
Operating temperature: -4° to 122°F (-20° to 50°C)
Operating humidity: 10% to 90%
(noncondensing)Operating altitude test: 40˚C, 9843 ft.
|
| System memory |
2048 MB DRAM1024 MB flash |
| Available transmit power settings |
2.4 GHz
23 dBm (200 mW)
20 dBm (100 mW)
17 dBm (50 mW)
14 dBm (25 mW)
11 dBm (12.5 mW)
8 dBm (6.25 mW)
5 dBm (3.13 mW)
2 dBm (1.56 mW)
-1 dBm (0.79 mW)
-4 dBm (0.39 mW)
5 GHz
26 dBm (400 mW)
23 dBm (200 mW)
20 dBm (100 mW)
17 dBm (50 mW)
14 dBm (25 mW)
11 dBm (12.5 mW)
8 dBm (6.25 mW)
5 dBm (3.13 mW)
2 dBm (1.56 mW)
-1 dBm (0.79 mW)
-4 dBm (0.39 mW)
|
|
|
Options Selectable for A / B / C / D / E / F / G / H / I / K / N / Q / R / S / T / Z
● 2.412 to 2.472 GHz;
● 5.180 to 5.320 GHz;
● 5.500 to 5.700 GHz;
● 5.745 to 5.825 GHz;
|
| Regulatory Approvals |
FCC, CE |
| Warranty |
90 days |
| Part Number |
CAB-HD8-ASYNC |
| Category |
Networking Cables |
Physical dimensions (H x W x D)
|
1.72 x 17.3 x 22.5 in. (4.4 x 43.9 x 57.1 cm) |
| Acoustics |
64.2 dBA at 40% fan speed, 68.9 dBA at 70% fan speed, and 77.8 dBA at 100% fan speed |
| RoHS compliance |
Yes |
| MTBF |
319,790 hours |
| Minimum ACI image |
ACI-N9KDK9-12.2A |
| Minimum NX-OS image |
NXOS-703I7.1 |